Call Us: +984134329500
ما را دنبال کنید
How to maintain and clean the refrigerator-freezer

Keep the refrigerator-freezer away from heat sources such as heaters, radiators, etc. In addition to damaging the outer body of the refrigerator-freezer, these heat sources cause the refrigerator-freezer to not function properly and in some cases even damage the engine and compressor. Another environmental factor that affects the performance of the refrigerator-freezer in direct sunlight. Sunlight causes the internal temperature of the freezer to rise and the efficiency of the compressor to decrease. Another effect of heat sources is to increase energy consumption, which increases maintenance costs.

Clean the inside of the refrigerator with a soft, lint-free, damp cloth. In most cases, the use of chemicals is not necessary and you can use household detergents such as vinegar or lemon juice. If you need to use industrial detergents, do not spray the cleaning chemicals directly on the surface of the refrigerator-freezer and dilute the chemical for use with water. To clean, simply soak a clean cloth in the diluted chemical and clean the surface from contamination. Then wipe the surface with a clean, damp cloth to remove any chemical residue. You can use a small brush or an old toothbrush to clean corners and out of reach. Pay attention to sealants and glass when cleaning. If you see any contamination, you can use baking soda solution with water. When stacking products in the refrigerator-freezer, be careful to create a suitable space for air circulation. Store the products in the refrigerator-freezer so that the air can reach all parts of the product and your products will cool and freeze evenly. Temperature balance and uniform temperature increase the storage time of products in the refrigerator. Put food and products in the shade in the summer and refrigerate after cooling and lowering the temperature.

Each time you pick a new product, check the previous products in the refrigerator. If the packaging is torn or spilled inside the refrigerator-freezer, remove the spilled material and do a brief cleaning of the refrigerator-freezer to remove any remaining products from the refrigerator.

Check refrigerator connections, wires and cables once a week. When moving the refrigerator, it is better to take out the products and avoid moving the refrigerator when it is full of products. In the compressor section, be sure to consider a distance for moving hot air with cold air and do not place the refrigerator-freezer attached to the wall. In addition to increasing the life of the refrigerator and reducing energy consumption, this also increases the storage quality of the products. In winter, it is better to lower the temperature of the refrigerator-freezer by a few degrees. At the bottom of the refrigerator, use wooden pallets or thick cardboard so that the refrigerator-freezer is away from the ground so that the bottom surface of the refrigerator-freezer does not rot and rust.

If you do not use the refrigerator or its freezer temporarily, it is better to unplug the refrigerator and unplug it. When moving, be sure to carry the refrigerator-freezer upright, with the engine compartment at the bottom and the top of the refrigerator always facing up. In other models, pay attention to how to carry it on the refrigerator-freezer box and also its manual.

Do not use the water hose to wash the refrigerator-freezer and always use a damp cloth and then dry. When cleaning, be sure to turn off the power to the device. Due to power fluctuations and increasing the life of the compressor and preventing unexpected events such as fire during power outages, be sure to use a power protector and avoid direct connection of the refrigerator-freezer to the power outlet. Do not use sharp tools such as knives or screwdrivers to remove or remove stains or residual objects on the inside and outside of the body. The use of these devices, in addition to the apparent damage to the device, causes heat exchange between the inside and outside of the refrigerator-freezer, and the products inside the refrigerator-freezer are damaged due to the increase in temperature inside the refrigerator-freezer.

Place the ingredients evenly in the refrigerator and avoid placing the products on one side of the refrigerator asymmetrically. Clean the compressor, power cords and engine compartment with a clean cloth twice a year and remove dust from the surface. Clear them. After cleaning for a few hours, leave the refrigerator door open to allow water or any remaining detergent to evaporate. This prevents the smell from remaining in the refrigerator-freezer space.

Avoid arbitrary manipulation and repair in the event of any problems with the operation of the refrigerator-freezer. Any irresponsible repair and manipulation can cause further damage and in some cases irreparable damage. In case of any problem or malfunction in the operation of the refrigerator-freezer, first turn off the power to the device. Then contact the after-sales service agencies of Zagros Sarmayeh Tabriz Company. After consultation and in case the problem is not solved, the experienced specialists of Zagros Sarmaye Tabriz Company will solve the problem in person as soon as possible.

To improve the performance of the refrigerator-freezer, it is better for the compressor to have a better air exchange with the environment and to be free of any dust. Be careful not to open the refrigerator-freezer door unnecessarily. This allows you to get the most out of your fridge, especially in the summer.

Arrange the products in the refrigerator so that customers can see all the products without opening the refrigerator-freezer door and can choose the products they need before opening the freezer refrigerator.

No frost (without thaw) and Defrost (with thaw) in the freezer